Used Electric Bicycles in Australia
Used electric bicycles are a lower-cost way into e-bike riding, as long as you know what to check. This guide covers what a pre-owned e-bike should cost, how to inspect the battery and motor, and how to enquire about current stock.
Second hand electric bikes for sale: how to enquire
Pre-owned stock changes as bikes arrive, so there is no fixed list on this page. Tell us what you are after and we will come back to you about matching used electric bikes for sale.
Share your budget
A realistic price range helps us suggest bikes with enough battery life left.
Tell us how you ride
Commuting, trails, cargo or folding for transport: the use decides the right frame and motor.
Add your height
Frame size matters more than brand for comfort and control, especially on used e-bikes.
How much should a used e bike cost?
CHOICE reports that new electric bikes range from under $800 to more than $12,000, with a typical well-equipped model around $2,000 to $3,500, and the new e-bikes in our own range run from about $1,199 to $13,999. A used bike should cost clearly less, because the battery is the most expensive wearing part. CHOICE e-bike buying guide
| Factor | Used e-bike | New e-bike |
|---|---|---|
| Upfront price | Usually lower | Higher |
| Battery health | Unknown until inspected; plan for a replacement | Full life ahead |
| Warranty | Depends on the seller; get it in writing | Manufacturer warranty |
| Compliance | Check the EN 15194 label and for modifications | Supplied compliant |
| Availability | Varies; enquire for current stock | Ready to order |
What to check on a second hand electric cycle
Battery age and condition
Ask how old the battery is and how often it has been charged. Walk away from any pack that is swollen, dented, leaking or runs hot.
Original charger
Use the manufacturer charger only. A missing or mismatched charger is a red flag for the whole battery system.
Motor and display
Ride it through every assist level. Listen for grinding or clicking and check the display for error codes.
Brakes and drivetrain
E-bikes wear pads, chains and cassettes faster. Check pad thickness, rotor wear and chain stretch.
Frame, fork and welds
Look for cracks near the head tube, motor mount and rear dropouts, especially on bikes that have been ridden hard.
Compliance label
Look for the EN 15194 label and make sure the bike has not been modified to exceed the 250W / 25 km/h limits.
Proof of ownership
Ask for the receipt, serial number and any service history so you know the bike is not stolen and has been maintained.
Used e-bike batteries: safety first
Low-quality, damaged or unbranded lithium-ion batteries are the main fire risk with e-bikes. Charge on a hard, non-flammable surface, use the charger supplied for the bike, and stop using any battery that is swollen, leaking or overheating. Product Safety Australia battery guide
E-bike rules differ by state
The national baseline for compliant e-bikes is EN 15194: 250W continuous power with assistance cutting out at 25 km/h. State rules differ and are changing in 2026, and converted e-bikes can be restricted, for example on Victorian trains. Check your state authority before you ride. Bicycle Network: e-bike rules
Used electric bikes: your questions answered
It can be, if you inspect the battery, motor, brakes and frame before paying. Pay extra attention to the battery: avoid packs that are swollen, dented, overheating or charged with a non-original charger, and ask for proof of ownership.
Prefer a new e-bike with a full warranty?
Compare new e-bikes, parts and accessories, or ask about used stock.